English
The Coverlite corrugated polycarbonate panel is an economical and robust product. It’s perfect to protect against rain, snow and wind while allowing light to pass through. It is 200 times stronger than glass and filters UV rays.
Super lightweight, these transparent polycarbonate panels can be used for the following fields: industrial, commercial, agricultural and residential.
Ask for high-quality polycarbonate! Who says transparent does not necessary mean corrugated polycarbonate!
Make sure you have the product on hand that will withstand the bad weather of a northern climate.
TWO CORRUGATED POLYCARBONATE PROFILES AVAILABLE
FEATURES OF CORRUGATED POLYCARBONATE SHEET
- High light transmission and advanced UV protection
- Virtually unbreakable material
- Corrugated roofing panel with high resistance to the weather effects: yellowing caused by UV rays and breakage caused by hail
- Provides excellent optical property
- Lightweight, easy to handle and install
- Easy to clean with a pressure washer
- Polycarbonate corrugated roofing sheet available in Clear, Bronze and Opal (for Softlite color or custom lenght, a minimum purchase is required)
USES OF POLYCARBONATE PANEL
COMMERCIAL
- Car wash
- Agricultural Building
- Roof for pool
- Warehouse
RESIDENTIAL
- Pergola Roof
- Gazebo
- Skylights
- Shelters
HORTICULTURE
- Greenhouse
- Garden Center
- DIY Greenhouse
TECHNICAL SPECIFICATIONS OF THE CORRUGATED PLASTIC ROOF PANEL
- Covers in width.
- Greca panel: 24’’
- MR9 panel: 36’’
- 75 panels per complete pallet
- A minimum quantity is required for custom lengths or colors
| Reference | Profil, lenght and color | Covers in sq. ft. | Light Transmission |
|---|---|---|---|
| PCR.01C.BR.2X8 | Greca 8’ Bronze | 16 | 35% |
| PCR.01C.BR.2X12 | Greca 12′ Bronze | 24 | 35% |
| PCR.01C.BR.2X16 | Greca 16′ Bronze | 32 | 35% |
| PCR.01C.CL.2X8 | Greca 8′ Clair | 16 | 90% |
| PCR.01C.CL.2X12 | Greca 12′ Clair | 24 | 90% |
| PCR.01C.CL.2X16 | Greca 16′ Clair | 32 | 90% |
| PCR.01C.OP.2X12 | Greca 12′ Opal | 24 | 55% |
| PCR.02C.BR.3X12 | MR9 12′ Bronze | 36 | 35% |
| PCR.02C.BR.3X16 | MR9 16′ Bronze | 48 | 35% |
| PCR.02C.CL.3X12 | MR9 12′ Clair | 36 | 90% |
| PCR.02C.CL.3X16 | MR9 16′ Clair | 48 | 90% |
Trick: For an ultra-economical project, use NEXrib Wave, an exterior PVC
CLOSURE STRIPS, ROOF RIDGES, AND HARDWARE
The foam closures creates a weather-tight seal against bad weather, available for Greca and MR9. The plastic closures are used to seal openings created where the panel meets a flat surface at are used to seal openings created where the panel meets a flat surface at edges or spacers. They allows to seal the opening created where the sheets meets flat surfaces at the flashing curbs, girts, etc.
A polycarbonate ridge is a corrugated flashing solution used to cover the apex where panels converge along the top of the roof.
For a lean-to structure with a roof slope away from a vertical wall, a polycarbonate End Cap can be used to prevent leaks (available for Greca only).
POLYCARBONATE SHEET INSTALLATION
Easy to install, corrugated polycarbonate panels can be used as vertical glazing or roofing. For detailed instructions, view and download the installation and technical guide.
LITTERATURE AND DOWNLOADS
